When I was beginning with column drills, I discovered all of the terms for the different components and also measurements truly perplexing. This post is created in order to help you if you are aiming to select a drill as well as should comprehend just what all the terms and also jargon ways.


Parts Found on Column Drills


Drill head— the setting up that comprises the chuck, pin, drill little bit, electric motor as well as pulleys.


Base— the heavy “foot” of the maker that is bolted to the floor in the case of a bigger pillar drill or the workbench in the case of a smaller bench-mounted drill.

Column— this is the vertical column that gives the column drill one of its names (confusingly, its other common names are “bench drill” and “pierce press”).

Pin— the vertical axle that remains in line with the drill bit as well as links the chuck to the drill head.

Chuck— the assembly that fits onto the pin and also holds the drill little bit.

Table— this is often bit more than a walk in smaller bench drill models. It’s the assistance for the job item to be drilled, and is affixed to the column some range below the head as well as above the base. Tables can be rectangular or round, as well as some can be tilted to allow tilted exploration via a job piece. Pillar drill devices can be gotten to clamp or cradle job items in numerous angles.


Depth scale— a setup that enables the bench drill to drill an opening part-way via a job item.


The Definition of Measurements in Drill Specs


Throat distance— this is the dimension from the local edge of the column to the spindle centre.


Swing— this is a common denominator of the capacity of pillar drills as well as is specified as two times the throat range, or to place it one more way, the maximum size of disc in which you can pierce a main hole.

Spindle taper— this specifies the form of the end of the pin. There are long, short, women and also male types. The chuck should work with the pin taper.


Collar Diameter— this is the outer diameter of the collar or chuck assembly that holds the bit.

Chuck dimension— this is the size of the inner opening of the chuck assembly, so it specifies the optimum dimension of little bit stem that the drill could take. As a result of this it is additionally known just as the boring capacity.


Pin travel— this is the amount by which the pin can be lowered or raised up and down and specifies the optimum depth of hole you can drill in one pass.

Optimum range spindle-to-table— this distance specifies the inmost job piece that you could get onto the table.


Optimum distance spindle-to-base— this is similar to the above as well as defines the optimum depth of job item you can pierce with the table eliminated.

For More Information About Casing Drilling, Mud Saver Valve, Drilling With Casing, Casing Running Tool Video, Tubular Running Equipment, Casing Running Equipment, Casing Cementing Head, Casing Running Tool For Sale, Casing Running Oilfield, Power Tong

Share This Story

Get our newsletter